Crosslinked

One of 8,240 open polymer and materials roles on Crosslinked, each read for materials, degree, visa and salary. See roles like this

RJG eDART Injection Molding Process Specialist

HOERBIGER · Delray Beach, FL,today,verified 2 h ago

High school-level Process Engineering roles on Crosslinked list a median of $84k (16 that show pay). This posting does not list pay.

Set up, run and troubleshoot nine injection molding presses using RJG eDART cavity-pressure monitoring to keep quality stable.

Apply

Weekly, free, one-click unsubscribe.

Apply

Worth knowing

Why it is interesting. Cavity-pressure-driven transfer and eDART curve analysis across nine presses, a data-rich approach to molding process control

Might not be for you. Production-floor role with a high school minimum, more press tending and troubleshooting than materials R&D

Deep specialist BS acceptable

Adjacent materials role:Sets up, optimizes and troubleshoots injection molding presses using RJG eDART cavity-pressure monitoring; addresses short shots, flash, sink, warpage; resin drying and handling

Seniority
Mid-level
Work
On-site
Type
Full-time
Degree
High school
Experience
3+ yrs
Industry
General manufacturing
Role
Process Engineering
Techniques
RJG eDART cavity-pressure monitoringpressure curve analysis,2 rolesfirst-piece inspection
Benefits
equity/stock

Role details

Step into a day on our molding floor You arrive to a wall of live RJG eDART dashboards—nine presses, each running cavity-pressure transfer from fill to pack/hold. You scan curves, check limits, verify transfer at the approved setpoint, and walk the cell to confirm stable cycles. A startup needs first-piece approval; another machine shows a subtle peak-pressure drift. You adjust within authorized parameters, document changes, and keep production on pace—safely, repeatably, and with quality as the constant. What you'll own

  • Set up, start, adjust, and optimize injection molding machines per approved setup sheets and specifications.
  • Execute mold, material, and color changeovers; release jobs once startup checks and first-piece verifications are complete.
  • Lock in approved parameters (injection speed/pressure, barrel and mold temps, cooling, pack/hold, cycle time) and maintain process documentation.
  • Ensure transfer to pack/hold is controlled by the approved cavity-pressure criteria, not merely by screw position or time.
  • Oversee the performance and quality of all nine assigned machines, maintaining safe, consistent operations.

Using eDART and cavity pressure like a pro

  • Operate and troubleshoot RJG eDART systems on each press; interpret pressure curves to assess stability, transfer, and packing.
  • Track transfer pressure, peak pressure, pressure rise, curve shape, and other indicators; react to alarms and out-of-limit conditions per procedure.
  • Identify abnormal signatures suggesting short shots, flash, dimensional shifts, sink, or warp; verify sensor health and channel mapping.
  • Maintain approved profiles, process windows, transfer criteria, and alarm limits; leverage data for root cause, validation, and continuous improvement.
  • Collaborate with Quality, Engineering, Maintenance, and RJG support for advanced troubleshooting and development.
  • Use monitoring proactively to catch variation before it becomes scrap or customer impact.

Troubleshooting and optimization

  • Diagnose and correct issues tied to machine, mold, material, sensors, or settings.
  • Address defects including short shots, flash, sink marks, warpage, burns, splay, contamination, and dimensional nonconformance.
  • Optimize cycle times without compromising approved pressure profiles or part quality; pursue OEE gains and scrap reduction.
  • Perform root-cause analysis and implement corrective actions within authorized limits; document significant adjustments.
  • Coordinate with Maintenance, Tooling, and Engineering on recurring mechanical, electrical, tooling, or process challenges.

Production coordination

  • Stay ahead of priorities, cycle times, machine performance, and job queues across all nine machines.
  • Respond quickly to stoppages, eDART alarms, process deviations, and quality concerns; monitor alarms and downtime trends.
  • Work with operators to ensure materials, packaging, and handling are correct.
  • Communicate machine status, delays, and open issues to the Production Manager; provide clear shift handoffs.
  • Support scheduling, mold changeovers, and startups as needed.

Quality first

  • Confirm molded parts meet dimensional, visual, and functional specifications.
  • Perform or support first-piece and in-process inspections; verify correct resin, colorant, mold, and process specs are in use.
  • Use pressure monitoring and process limits to hold quality steady; contain nonconforming material and notify Quality when required.
  • Investigate deviations and correct before resuming production when procedures call for it; complete inspection and production records accurately.
  • Support quality investigations, corrective actions, process validation, and CI initiatives.

Materials and auxiliary equipment

  • Confirm material requirements up front; ensure proper drying, handling, blending, and loading per resin specs.
  • Monitor dryers, loaders, temperature controllers, mold temp units, water lines, and other auxiliaries.
  • Prevent mix-ups and contamination; identify material-related variation and its impact on pressure profiles and quality.
  • Coordinate fixes for supply or auxiliary equipment issues.

What you bring

  • High school diploma or GED required; technical training in plastics or manufacturing preferred.
  • 3+ years in injection molding preferred with independent setup, processing, and troubleshooting capability.
  • Hands-on RJG eDART experience and cavity-pressure monitoring required.
  • Proven understanding of cavity-pressure-based transfer from injection to pack/hold required.
  • Ability to read curves and spot process drift; knowledge of molding defects, variables, and corrective levers.
  • Experience with mold/resin changes and auxiliaries (dryers, loaders, temperature controllers, etc.).
  • Comfort with setup sheets, work instructions, control plans, and quality specs.
  • Strong mechanical aptitude, keen attention to detail, and sharp problem-solving skills.
  • Ability to manage priorities across nine presses and communicate clearly with production and support teams.

Language and math

  • Must speak English.
  • Fluency with addition, subtraction, multiplication, and division.
  • Comfort switching among inches, millimeters, decimals, and similar units.

Digital tools

  • Microsoft Office proficiency, including PowerPoint, Excel (data analysis, metrics, reporting), Word, and Teams.
  • SAP experience is a plus.

Core proficiencies

  • Injection Cavity Pressure Monitoring
  • Injection Molding Systems
  • Injection Molds and Dies
  • Injection Molding Equipment Operations

Related roles

Common questions

Where is the RJG eDART Injection Molding Process Specialist role at HOERBIGER based?

This role is based in Delray Beach, FL.

What degree is required for the RJG eDART Injection Molding Process Specialist role at HOERBIGER?

This role asks for a high school diploma or equivalent.

How many years of experience does this RJG eDART Injection Molding Process Specialist role require?

The posting calls for at least 3 years of relevant experience.

What techniques or methods are required for this RJG eDART Injection Molding Process Specialist role?

RJG eDART cavity-pressure monitoring, pressure curve analysis, first-piece inspection.